ALL PURE CHEMICAL -- ALL PURE MURIATIC ACID  -- 6810-00N055493
<pre>=====================  Product Identification  =====================

Product ID:ALL PURE MURIATIC ACID
MSDS Date:03/01/1990
FSC:6810
NIIN:00N055493
=== Responsible Party ===
Company Name:ALL PURE CHEMICAL
Box:268
City:TRACY
State:CA
ZIP:95376-0268
Country:US
Info Phone Num:209-836-5404
Emergency Phone Num:209-835-5423
CAGE:45202
=== Contractor Identification ===
Company Name:ALL PURE CHEMICAL
Address:26700 S BANTA RD
Box:268
City:TRACY
State:CA
ZIP:95376-0268
Country:US
Phone:209-835-5423
CAGE:45202

=============  Composition/Information on Ingredients  =============

Ingred Name:HYDROGEN CHLORIDE; (HYDROCHLORIC ACID)  (SARA III)
CAS:7647-01-0
RTECS #:MW4025000
Fraction by Wt: 31.5%
OSHA PEL:5 PPM, C
ACGIH TLV:5 PPM, C
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:WATER
CAS:7732-18-5
RTECS #:ZC0110000
Fraction by Wt: BALANCE
OSHA PEL:N/K 
ACGIH TLV:N/K 

Ingred Name:SUPP DATA:SPECIFIC ANTIDOTE. SUPPORTIVE CARE. TREATMENT
    BASED ON JUDGMENT OF MD IN RESPONSE TO RXNS OF THE PATIENT.
RTECS #:9999999ZZ

Ingred Name:OTHER PROT EQUIP:DEPEND ON OPERATION. EYE WASH FOUNTAIN &
    SAFETY SHOWER SHOULD BE LOCATED IN IMMEDIATE WORK AREA.
RTECS #:9999999ZZ

=====================  Fire Fighting Measures  =====================

Flash Point Method:TCC
Flash Point:NONE
Extinguishing Media:MEDIA SUITABLE FOR SURROUNDING FIRE .
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
    EQUIPMENT .
Unusual Fire/Explosion Hazard:HYDROCHLORIC ACID ITSELF IS
    NON-FLAMMABLE. THERE IS, HOWEVER, LATENT FIRE OR EXPLOSION HAZARD
    DUE TO HYDROGEN GAS GENERATED WHEN ACID IS IN CONTACT W/METALS.

=============  Exposure Controls/Personal Protection  =============

Supplemental Safety and Health

==================  Physical/Chemical Properties  ==================

Boiling Pt:B.P. Text:168F,76C
Vapor Pres:25 @ 20C
Vapor Density:11
Spec Gravity:1.16
Solubility in Water:INFINITE
Appearance and Odor:WHITE TO YELLOW CLEAR LIQUID; PUNGENT ODOR.

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
AVOID BASE & CORROSIVE MATLS. AVOID CONTACT W/MOST METALS. AVOID
    OXIDIZING MATLS, CAN OXIDIZE TO CHLORINE.
Stability Condition to Avoid:CONTACT W/METALS MAY CAUSE GENERATION OF
    FLAMMABLE CONCENTRATIONS OF HYDROGEN GAS.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.